

4 easy tips for applying wallpaper
Applying wallpaper may seem like a daunting task. However, with the right tips and a bit of organization, you can easily transform any room in your home into an elegant and modern space. In this article, we will explore 4 easy tips to ensure your wallpaper application is a success.
1. Properly prepare the wall before applying wallpaper
The first step to successfully applying wallpaper is to properly prepare the wall where it will be applied. A clean and smooth wall will allow for perfect adhesion of the wallpaper and prevent air bubbles or irregularities.
Clean the wall
First, clean the wall using a brush and water mixed with soda crystals. This mixture will help degrease and remove any impurities from the wall. Don’t forget to rinse with clean water after scrubbing.
Repair imperfections
Holes, cracks, and other wall irregularities should be filled with a filler appropriate for your wall type (plaster, concrete, etc.). Let it dry according to the manufacturer's instructions, then lightly sand it for a smooth and even finish.
Tropical Mural Wallpaper
Tropical Jungle Mural Wallpaper | Colorful Parrots and Green Foliage
TropiArtTropical Jungle Wallpaper with Colorful Parrots and Green Foliage offers an explosion of vibrant colors and exotic life, transforming your living s...
View full detailsBlack and Gold Mural Wallpaper | Monstera Banana and Palm Tree
Flare ArtsBring a touch of exoticism and luxury to your interior with this beautiful wallpaper Tropical Golden Leaves. The large monstera and palm leaves are...
View full detailsTropical Jungle Mural Wallpaper | Lush Foliage and Hummingbirds
TropiArtThe Tropical Jungle Wallpaper with Massive Foliage and Hummingbirds offers a complete immersion into a world of lush greenery and exotic life. With...
View full details2. Choose the right wallpaper application method
Did you know that there are different methods for applying wallpaper? Depending on the type of wallpaper (vinyl, non-woven...) and your preferences in terms of practicality, certain techniques can make the task easier.
Traditional application: applying glue to the wallpaper
This method involves applying glue directly to the wallpaper roll. To do this, unroll the wallpaper on a table and spread the glue with a brush or roller. Be sure to smooth it out evenly to avoid air bubbles.
Quick application: applying glue to the wall
In this case, the glue is applied directly to the wall, not the wallpaper. This method is particularly practical for non-woven wallpapers as it saves time during installation. Make sure to follow the drying time indicated by the glue manufacturer.
3. Cutting and positioning wallpaper strips
To achieve a harmonious result, it's important to know how to cut and position the wallpaper strips. Here are some tips to help you succeed in this crucial step.
Cut the strips to the right length
Start by measuring the height of the wall and add about 10 cm for trimming during installation. Next, unroll the wallpaper on a table, and using a tape measure, mark the desired length. Use a cutter or scissors to neatly cut the strip.
4. Tips for successfully applying wallpaper strips
Now that you've prepared your wall and cut your wallpaper strips, it's time to apply them. Here are some tips to achieve a professional result with ease.
Applying the first strip
This can be intimidating, but don’t worry! Using a level, draw a vertical line on the wall as a guide for positioning your first strip. Then, apply the glue (according to your chosen method) and gently unroll the wallpaper, following the guide line. Don’t forget to leave a few extra centimeters at the top and bottom for trimming if necessary.
Smoothing and trimming the edges
With a smoothing brush, remove any air bubbles and ensure the strip adheres perfectly to the wall. To finish, use a cutter and a ruler to neatly trim the top and bottom edges of the wallpaper strip.
Applying the following strips
Apply the remaining strips, making sure to align them edge-to-edge, without worrying too much about matching the patterns between strips (unless your wallpaper allows for it). Feel free to go over the strips again with the smoothing brush to help with adhesion and eliminate air bubbles.
Successfully applying wallpaper is simple if you follow these 4 easy tips: properly prepare the wall, choose the right application method, measure and cut your strips accurately, and take your time during the installation. This will ensure you achieve a professional and elegant result to enhance your interior. Happy decorating!